×
Guy Machinery Guy Machinery ATVs
Hustler

Chainless x5000

< Back

The top of the range trailed, 2 bale capacity balefeeder, the Chainless X5000 literally feeds every type of round or square bale without ever plugging, and it minimises feed waste. It’s patented Total Control Self-loading System simplifies bale loading ensuring every bale is loaded correctly and with a beef’d up 3 ton capacity it handles the largest of bales with ease.

5 KEY BENEFITS:

CHAINLESS – no troublesome feed chains is a key advantage for – Reliability, lower maintenance and quieter operation, the teasing action of the rotors uses feed more economically, because it is easier for the cattle as they can eat it because it is fluffed up. The Chainless X2500 can effectively feed out any bale type in both round or square. Chainless is a virtually silent feeding operation which means stock are more comfortable.

TOTAL CONTROL SELF-LOADING SYSTEM – gives you total control over loading the bale. The simple, reliable and fool-proof single cylinder design of the Hustler loading system is safer than other loading systems and allows unwrapping of the bale above the feed cradle, reducing waste.  The Hustler loading system can be reversed if the operator decides not to load that bale. It also has more support area for soft or square bales. The X5000 has more leverage, stronger design and larger 1.5 tonne capacity.

FEED ANY BALE – The new rotor shape and bale chamber design has better penetration on tight bales, frozen bales and square bales and the shape cleans sticky bales better. A patented new Axial rotor has more grip on sloppy, rotor cut bales which makes feeding them out easier and more efficient and centralizes the bale in the feeding chamber, reducing wastage. The larger bale chamber makes it possible to feed out a wider range of bales, and makes using the X2500 very simple for operators of all skill levels and reduces the need for platform adjustment.

EASY CLEANING – The new Easy Clean Hypaflo wiper panel – The newly developed wiper panel that clears the hay from the rotors better. It has a new quick release latching system for releasing the panel to clean out any hay.

STABILITY – The Chainless x5000 with its low centre of gravity and wide wheel track makes it the most stable bale feeder on the market when in operation adding peace of mind.

 

FEATURES:

Axial rotor

The addition of a new Axial Rotor with centralising paddles keeps the bale positioned in the centre of the feeding chamber to minimise wastage and provide better grip on soft bales.


Feedout any bale

The Chainless X5000 is the most versatile bale feeder, it will feed out any bale round & square.

Feed control

Infinite variation in feed control, allows you to feed thick for cattle, thin for sheep to increase the palatability for your stock.

Polyethylene floor

Hustler’s proven polyethylene platforms with ribbed design keeps bales tracking straight and with 30% less friction than steel it reduces drag on the bale which makes feeding out sticky bales easier and it will never corrode. The X5000’s platform is wider to reduce waste with sloppy bales.
Hypaflow wiper

The Easy Clean Hypaflo Wiper Panel minimises blockages and ensures that hay drops outside the wheel tracks to avoid being flattened into the mud. A quick release latch releases the wiper panel for easy cleaning.

Sandblasted, wet coat finish

New sandblasted finish and improved paint system means your new Chainless X5000 will look smarter for longer.

Quick release wiper

A quick release latch releases the wiper panel for easy cleaning.

QRC grips

Another industry first from Hustler! Quick coupling grips make connecting hoses easier and the colour coded for easy coordination.

Rotor teeth

Many hours of research and development have gone into the shape of the teeth to makes them clean easier, and have more aggression on tight bales. The X2500 has 5 teeth per rotor to provide extra grip on soft bales.

Tie point for strings

We’ve included to grab bars, so you can tie the square bale strings to the platform. This save the operator having to remove the strings before feeding out.

Adjustable platform

The position of the new platform design is adjustable to suit any bale type you may need to feed out, from the worst of miss-shapen bales to the tightest packed square bales the X2500 handle them with ease.

FeedGuide

The clear, easy to read platform height guide shows starting positions for various bale types making it easier to use for all operators.

Protective covers

Transmission covers protect against mud and debris getting at the heavy duty drive system which reduces maintenance.

Loadial

The new easier to read loading indicator makes loading any bale simple: line up the indicator to correct bale position, back in and load.

Divertor valve

Our divertor valve is a safety feature and allows the X5000 to be used behind tractors with just 2 double acting remotes.

High tensile chassis

The X5000 is built to handle larger bales and has an impressive strength to weight ratio, achieved by using high tensile steel and larger section members. We’ve done our homework and put the steel where it’s needed, not in case it’s needed.

6-stud axles

Our 6-stud axles are the strongest on the market giving you longer life and more load capacity.
Massive ground clearance

The X5000 is has the more ground clearance allowing you to operate on rugged terrain and with the clean underside of the chassis there is nothing to damage or get snagged should you belly out.
Single post drawbar

The single post drawbar design has set the benchmark in feeder maneuverability and tighter turning. The drawbar is fitted with built-in road-legal safety chain mounts and an adjustable height towing eye.

Swiveling towing eye

The heavy duty 12,000kg rated forged towing eye has 50mm height adjustment to suit different size tractors. It rotates 360°, making feeding out on uneven terrain trouble-free.

Heavy duty parking jack

New heavy-duty parking jack has an oversize mounting for a positive lock and safety. To allow for tighter turning, we’ve added an extra mount on top of the drawbar for stowing the jack.

Stringbox

The Chainless X5000 is equipped with a large capacity stringbox which is very handy for stowing that bale wrap, fencing standards, and other items while you’re out and about.

Flotation tyres

Extra wide 13/55-R16 flotation tyres are standard equipment for less compaction in wet conditions.

Mudguards

Mudguards standard keep your feed clean and dry when traveling between paddocks and reduces feed spoilage when operating in muddy conditions.

Quick release wiper

A quick release latch releases the wiper panel for easy cleaning.

QRC grips

Another industry first from Hustler! Quick coupling grips make connecting hoses easier and the colour coded for easy coordination.

Rotor teeth

Many hours of research and development have gone into the shape of the teeth to makes them clean easier, and have more aggression on tight bales. The X5000 has 5 teeth per rotor to provide extra grip on soft bales.

Hose holder

Requested by farmers and unique to Hustler balefeeders, the drawbar mounted hose holder keeps the hydraulic hoses out of harms way, reducing chances of downtime. The X5000’s hose holder has provision to hold the hoses when the bale feeder is not in use.

 

OPTIONAL EXTRAS:

Side chute

Designed to help when feeding out onto feedpads, over hotwires, or into troughs. Angle is fully adjustable and there is more clearance and longer reach to...

Square bale extension

An extension bar extends the platform for extra support for 8’ bales.

Trac grip tyres

Grippy 10/75-R15.3 traction tyres for extra stability on steeper terrain.

LoadCam

Another industry first from Hustler. The optional LoadCam makes lining up the second bale easier.

SPECIFICATIONS:

Bale size round: 4’ X 4’ – 6’ X 5’
Bale size square: all sizes up to 8’ long
Capacity: 3000kg
Capacity: 2 bale (round or square)
Unit weight: 1180kg
Tractor size: 120hp +
Hydraulics required: 2 X double-acting, 30-60 litres/min, 2250-3000 psi
Loading: Total Control Self-loading
Towing eye: Adjustable height, 50mm swiveling forged, 12t rated
Axles: 6 Stud, 60mm Square
Ground clearance: 443mm
Size (L x W x H): 4467 x 2410 x 1669mm

 

Subscribe...

Sign up to our newsletter today to receive information about our latest news, offers and events. By signing up you are agreeing to our privacy policy which you can read by clicking here.

GUY MACHINERY LTD | LYNDALE WORKS | GISBURN | CLITHEROE | LANCASHIRE BB7 4ES

Tel 01200 445555 | Fax 01200 445038